Name: 3DLac - Nejprodávanější adhezivum ve spreji
Brand: 3Dlac
SKU: UHJvZHVjdFZhcmlhbnQ6MTk4Mw==
Price: 263.00 CZK
Availability: InStock

Safety Datasheet

FICHA%20TECNICA%203DLAC_compressed_a7643679.pdf

RoHS

Upsell

Manufacturer

3Dlac

Brand

Technical Datasheet

Link to video

{"time": 1712844896254, "blocks": [], "version": "2.24.3"}

Say goodbye to failed prints! Up to 400 uses per spray. A light 3DLAC mist over the surface is enough to hold the first layer of plastic completely to the base and give you a peaceful sleep during night-long prints. No need to use paper glue, Kapton tape, or other questionable workarounds to get your print to stick to the print bed. 3Dlac is mostly suited for standard materials like PLA, PETG, PVB, CPE (where it is there usefull as a separation layer), or wood filaments. It is suitable for objects of any size.

Totally! Thanks to the properties of 3DLAC, while the base is hot the extruded plastic is firmly stuck. Once the printed piece gets cold, it can be taken off smoothly and without damage.&nbsp;

Spray a light 3Dlac mist over the surface from a distance of around 20cm to your printer's print bed. Don't worry if a bit of 3Dlac goes to some mechanical parts, it won't stick until directly heated above&nbsp;∼ 45°C. The higher the temperature, the stronger the adhesion will be. 3Dlac is "thermoactive". After the printing process, let the printed part cool down. If you want to clean 3Dlac from your print bed, just use a little bit of water.

3DLac - Bestselling adhesive spray

3DLac adhesive spray keeps the first layer stuck while the bed is hot and releases when cool. Up to 400 uses for PLA and PETG. In stock, fast delivery.

3DLac - Nejprodávanější adhezivum ve spreji | 3Dlac

Odlepí se po vytištění?

Jak aplikovat 3Dlac?